Bypass bms
Bypass bms
Hi, i already bypass the ninebot battery, connect everything and is ok but stay with error 21 so i made firmware from yours configuration page and check the box for ninebot run with any battery, the error disapear but only run 15km/h without streng, so my question is if are anyway to bypass bms sensor on the controller.
- Fallingwater
- Posts: 4
- Joined: Sun Sep 05, 2021 2:49 pm
Re: Bypass bms
What battery are you running?
- dariasmith
- Posts: 1
- Joined: Mon Dec 27, 2021 9:20 am
Re: Bypass bms
bms sensors are responsible for turning on the electric motor. If you exceed the speed limit set by your controller, it will stop moving and will even run out of power. To avoid this issue, make sure that you set a speed limit.Hi, i already bypass the ninebot battery, connect everything and is ok but stay with error 21 so i made firmware from yours configuration page and check the box for ninebot run with any battery, the error disapear but only run 15km/h without streng, so my question is if are anyway to bypass bms sensor on the controller. tunnel rush
Re: Bypass bms
help! My E45 was working fine but today it wont turn off. when i try to turn it off, the battery indicator on the bottom disappears but the LEd display remains on and shows 0 mph. When i hold power button again it turns it on fully and the battery bars show back up
how do I fix this?
how do I fix this?
- King_Arthas
- Posts: 9
- Joined: Thu Sep 30, 2021 9:53 pm
Re: Bypass bms
What you mean bypass? What model is it?Hi, i already bypass the ninebot battery, connect everything and is ok but stay with error 21 so i made firmware from yours configuration page and check the box for ninebot run with any battery, the error disapear but only run 15km/h without streng, so my question is if are anyway to bypass bms sensor on the controller.
Im planing to connect not official battery in parallel on E25...
- smithleo123
- Posts: 1
- Joined: Thu May 12, 2022 4:00 am
Re: Bypass bms
What model are you using? ovo game
Re: Bypass bms
Should only run at limited speed and should not leave the bms sensor Dynamons World
Return to “Ninebot ES and E-series”
Who is online
Users browsing this forum: Google [Bot] and 3 guests