Here can u see the codesalso did you get a pop up for port 4444 to be opened and did you in fact allow it to be opened?
I got this message:
C:\Users\Badabing DMX>telnet 127.0.0.1 4444
Connecting To 127.0.0.1...Could not open connection to the host, on port 4444: Connect failed
alright, so you have a layer 1 issues, send picts on wiring.. do you have lights on your st-link and are you sure you loaded all the drivers to the stick.. can you computer see the stick?
C:\Users\Badabing DMX\Desktop\openocd-0.10.0>.\bin-x64\openocd.exe -f .\scripts\interface\stlink-v2.cfg -f .\scripts\target\nrf51.cfg
Open On-Chip Debugger 0.10.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
adapter speed: 1000 kHz
Info : Unable to match requested speed 1000 kHz, using 950 kHz
Info : Unable to match requested speed 1000 kHz, using 950 kHz
Info : clock speed 950 kHz
Info : STLINK v2 JTAG v31 API v2 SWIM v7 VID 0x0483 PID 0x3748
Info : using stlink api v2
Info : Target voltage: 3.173839
Error: init mode failed (unable to connect to the target)
in procedure 'init'
in procedure 'ocd_bouncer'