You have to use DownG V36 (Mi3 compatible) for firmware.
And, after firmware, you have to flash a new BLE compatible ! (I recommand BLE 0.75 v10 for Mi3 from Cami)
For max speed with V5, you have to turn on the scooter with the brake pressed (hold the brake lever + power button)
For my mi 3, I use V6 with camiBLE 0.75 v10 and seem good, tested only a very short time !
Look at this, all is explain for mi 3 !!!
Could new Xiaomi Scooter 3 be hacked ?
Re: Could new Xiaomi Scooter 3 be hacked ?
Thanks, it works now after BLE upgrade as you suggested.
But, with V5 firmware i can drive up to 29 km/h but not 35 km/h, do you know why this limit ?
Also, the scooter is no longer recognized by Xiaomi Home app , it always says : " scooter is not connected "
Is this normal ?
But, with V5 firmware i can drive up to 29 km/h but not 35 km/h, do you know why this limit ?
Also, the scooter is no longer recognized by Xiaomi Home app , it always says : " scooter is not connected "
Is this normal ?
Re: Could new Xiaomi Scooter 3 be hacked ?
Speed on flat for me :
max 33/34km/h with 100%battery (70 kg)
with 50% battery...max 29/30km/h !
For Xiaomi Home app, I think it's normal...because you hack your scooter....lol !
But no need more Xiaomi Home app, you can do same thing with DownG or other app !
max 33/34km/h with 100%battery (70 kg)
with 50% battery...max 29/30km/h !
For Xiaomi Home app, I think it's normal...because you hack your scooter....lol !
But no need more Xiaomi Home app, you can do same thing with DownG or other app !
Re: Could new Xiaomi Scooter 3 be hacked ?
Strange...with V6, without turbo mode, max speed is 23km/h ! not 25
Re: Could new Xiaomi Scooter 3 be hacked ?
Tried V5 too.
I get the same error 42 but the scooter seems to work fine.
Looking forward to get a fix for this error by someone.
I get the same error 42 but the scooter seems to work fine.
Looking forward to get a fix for this error by someone.
Re: Could new Xiaomi Scooter 3 be hacked ?
read this post for error 42 (BLE...)...
Re: Could new Xiaomi Scooter 3 be hacked ?
I test generating firmware in DRV223/DRV224, and I confirm that max speed is 30 km/h in this case...Thanks, it works now after BLE upgrade as you suggested.
But, with V5 firmware i can drive up to 29 km/h but not 35 km/h, do you know why this limit ?
Also, the scooter is no longer recognized by Xiaomi Home app , it always says : " scooter is not connected "
Is this normal ?
I think the hack for 30 km/h limit don't work with scooter 3 !!! 😭
Re: Could new Xiaomi Scooter 3 be hacked ?
[need help] Hello, with my custom firmware DRV155, when the battery is below 40%, the scooter accelerates by jerks in the climbs! I have a xiaomi "3". The parameters:
- Version: DRV155
- Max speed
Sports: 26 km/h
Drive: 21 km/h
Eco: 8 km/h
- Sports mode
Nominal draw: 32.0A
Max current: 55.0A
- Drive mode
Nominal draw: 17.0A
Max current: 32.0A
- Eco mode
Nominal draw: 7.0A
Max current: 17.0A
- Throttle lever params:
Throttle mode: Brake trick
DPC curve: Quadratic
- Brake lever params:
Lever virtual limit: 115
Min phase current: 8.0A
Max phase current: 30.0A
- Motor start speed: 2.0 km/h
- Brake light mode: stock
- Brake light flash frequency: 235
- No brake light flash on throttle release
- Throttle current raising coefficient: 800
- Brake current raising coefficient: 500
- Cruise control delay: 5 seconds
- Voltage limit: 43.01V
- Wheel size: 8.5 inches
- No KERS
- Version spoofing
- Version: DRV155
- Max speed
Sports: 26 km/h
Drive: 21 km/h
Eco: 8 km/h
- Sports mode
Nominal draw: 32.0A
Max current: 55.0A
- Drive mode
Nominal draw: 17.0A
Max current: 32.0A
- Eco mode
Nominal draw: 7.0A
Max current: 17.0A
- Throttle lever params:
Throttle mode: Brake trick
DPC curve: Quadratic
- Brake lever params:
Lever virtual limit: 115
Min phase current: 8.0A
Max phase current: 30.0A
- Motor start speed: 2.0 km/h
- Brake light mode: stock
- Brake light flash frequency: 235
- No brake light flash on throttle release
- Throttle current raising coefficient: 800
- Brake current raising coefficient: 500
- Cruise control delay: 5 seconds
- Voltage limit: 43.01V
- Wheel size: 8.5 inches
- No KERS
- Version spoofing
Re: Could new Xiaomi Scooter 3 be hacked ?
I have just tried flashing CamiAlfa BLE075_V10 using m365downg, but it ended up raising a 41 Error (scooter is not bricked, options can be changed using downG, but with a 41 error code).
But after that, I flashed the CFW V6 (v1.5.5) from https://mp365.es/hacktool/mi3/ (using DownG v36) and fixed the 41 Error Code in the same time! Looks like BLE075_V10 has some communication issues with the original firmware.
It's too cold out there to test right now, I'll keep you in touch in case of trouble.
But after that, I flashed the CFW V6 (v1.5.5) from https://mp365.es/hacktool/mi3/ (using DownG v36) and fixed the 41 Error Code in the same time! Looks like BLE075_V10 has some communication issues with the original firmware.
It's too cold out there to test right now, I'll keep you in touch in case of trouble.
Re: Could new Xiaomi Scooter 3 be hacked ?
Experimental support for the Mi Scooter 3 is now available on mi.cfw.sh by selecting the "Compat with newer Mi Scooter models" patch in the Basics section.
As a bonus, this patch also restores the proper display of the lock icon on the dashboard for compatible models (3/Lite/1S/Pro2).
This patch does not require custom BLE firmware, it's fully compatible with stock Mi3 BLE.
As a bonus, this patch also restores the proper display of the lock icon on the dashboard for compatible models (3/Lite/1S/Pro2).
This patch does not require custom BLE firmware, it's fully compatible with stock Mi3 BLE.
Who is online
Users browsing this forum: No registered users and 6 guests