Xiaomi Pro 2 throttle lever doesn't work with SHFW 0.2.5

mober
Posts: 4
Joined: Thu Jun 30, 2022 10:39 pm

Xiaomi Pro 2 throttle lever doesn't work with SHFW 0.2.5

Postby mober Thu Jun 30, 2022 10:52 pm

I have flashed SHFW 0.2.5 to my Xiaomi Pro 2.
The flashing process finishes successfully and everything seems to work, I can tune the SHFW config, turn on/off lights, change the User Interface Idle screen, etc...
But the throttle lever doesn't work, and the scooter cannot throttle in any of the modes.

I can flash back again to the original FW or CFW and throttle lever works again, but I have not been able to throttle with SHFW in any way.

Am I doing something wrong? Have someone experienced the same problem?

Image
User avatar
F0xMaster
Posts: 68
Joined: Fri Jan 10, 2020 10:33 am
Location: Poland

Re: Xiaomi Pro 2 throttle lever doesn't work with SHFW 0.2.5

Postby F0xMaster Sun Jul 03, 2022 10:40 am

I have flashed SHFW 0.2.5 to my Xiaomi Pro 2.
But the throttle lever doesn't work, and the scooter cannot throttle in any of the modes.
Have you configured your power curves? Obviously, the scooter won't move if you don't set power parameters, SHFW doesn't come with any out of the box.
mober
Posts: 4
Joined: Thu Jun 30, 2022 10:39 pm

Re: Xiaomi Pro 2 throttle lever doesn't work with SHFW 0.2.5

Postby mober Mon Jul 04, 2022 10:31 pm

I have flashed SHFW 0.2.5 to my Xiaomi Pro 2.
But the throttle lever doesn't work, and the scooter cannot throttle in any of the modes.
Have you configured your power curves? Obviously, the scooter won't move if you don't set power parameters, SHFW doesn't come with any out of the box.
OMG. That was the problem!
It was so obvious I didn't realize.
I assumed it was coming with some predefined power parameters like other firmwares and just checked throttling after flashing and I though there was some problem.
Thanks a lot :)
zhuanghu
Posts: 1
Joined: Fri Aug 05, 2022 1:50 am

Re: Xiaomi Pro 2 throttle lever doesn't work with SHFW 0.2.5

Postby zhuanghu Fri Aug 05, 2022 1:56 am

Hello there, I just received my new scooter and I was wondering if I will be able to use cfw with it? LOL Beans
ElizabethBray
Posts: 3
Joined: Fri Aug 19, 2022 3:50 am

Re: Xiaomi Pro 2 throttle lever doesn't work with SHFW 0.2.5

Postby ElizabethBray Fri Aug 19, 2022 4:00 am

Follow the instructions and remember to pay attention to a few small steps spin the wheel
penny14036
Posts: 6
Joined: Tue Aug 23, 2022 1:21 am

Re: Xiaomi Pro 2 throttle lever doesn't work with SHFW 0.2.5

Postby penny14036 Tue Aug 23, 2022 1:35 am

I also think you should completely follow the instructions. Remember to pay attention to a few small steps on the wheel part.
lorde
Posts: 1
Joined: Wed Aug 24, 2022 7:36 am

Re: Xiaomi Pro 2 throttle lever doesn't work with SHFW 0.2.5

Postby lorde Wed Aug 24, 2022 7:40 am

I have flashed SHFW 0.2.5 to my Xiaomi Pro 2.
But the throttle lever doesn't work, and the scooter cannot throttle in any of the modes.
Have you configured your power curves? Obviously, the scooter won't move if you don't set power parameters, SHFW doesn't come with any out of the box.
Thank you, i had the same problem, luckily I found the error and fixed it.
posterdle nyt wordle
allbertluu
Posts: 1
Joined: Thu Aug 25, 2022 7:09 am

Re: Xiaomi Pro 2 throttle lever doesn't work with SHFW 0.2.5

Postby allbertluu Thu Aug 25, 2022 7:12 am

In addition to these two new features, SHFW 0.2.5 also fixes a problem where the screen would not turn on when the battery is low and adds a new option to calibrate the resistance range of your coil.
cinenerdle stumble guys
johnde12
Posts: 1
Joined: Sat Sep 24, 2022 9:12 am

Re: Xiaomi Pro 2 throttle lever doesn't work with SHFW 0.2.5

Postby johnde12 Sat Sep 24, 2022 9:17 am

This is a serious issue, as it means that users who are using this device will not be able to use it with any other SHFW app, and it means that they will have to manually adjust the throttle lever in order to use the device. wordle nyt

Return to “Xiaomi Scooters”

Who is online

Users browsing this forum: No registered users and 2 guests