Solder points BLE 3.2?

probablylost
Posts: 2
Joined: Sat Jun 11, 2022 8:10 am

Solder points BLE 3.2?

Postby probablylost Sat Jun 11, 2022 8:46 am

Hello.
I have a Mi Pro2 manufactured 02/21 that I want to downgrade with st link. It has a V3.2 BLE I am having trouble finding a picture of solder points? it does not have the three points on the right of the board but has them above the switch, same? And does a resistor need to be removed on this model? thank you!
probablylost
Posts: 2
Joined: Sat Jun 11, 2022 8:10 am

Re: Solder points BLE 3.2?

Postby probablylost Sat Jun 11, 2022 10:56 am

Me again

So I thought i'd give it a go and tried those points on my BLE (1.5.7) and found then removed the c2 resistor on the back of the board.

When running the blePROrec script it cannot connect to target. So I guess i've got something wrong. STlink is powering the device and drivers installed.
Any help would be appreciated. Thanks
Janebo81
Posts: 1
Joined: Wed Jun 15, 2022 3:13 pm

Re: Solder points BLE 3.2?

Postby Janebo81 Wed Jun 15, 2022 3:49 pm

Hello, I was sending you a email, I was not possible to post pictures here, I also have a copy of MiDu-Flasher_v1. 0.4 for automatic downgrade from ST-LINK if you need
Valichella
Posts: 1
Joined: Wed Jun 15, 2022 9:36 pm

Re: Solder points BLE 3.2?

Postby Valichella Wed Jun 15, 2022 9:39 pm

Can you send it to me too, please. Also want to downgrade BLE from 1.5.5 but didn't find how to connect my BLE to st-link.
oquska
Posts: 1
Joined: Fri Jun 17, 2022 9:27 am

Re: Solder points BLE 3.2?

Postby oquska Fri Jun 17, 2022 9:33 am

Solder pins are seems okey but i wasn't sure about c2 transistor. Can anyone successfully flashed this Ble point us to right directions?

Image
Image
mober
Posts: 4
Joined: Thu Jun 30, 2022 10:39 pm

Re: Solder points BLE 3.2?

Postby mober Thu Jun 30, 2022 11:05 pm

I have been able to downgrade BLE 157 to BLE 090 the BLE_V3.2 board with a ST-Link, removing this capacitor marked in the image.
Image
misiozol
Posts: 24
Joined: Mon Sep 27, 2021 4:04 pm

Re: Solder points BLE 3.2?

Postby misiozol Sat Jul 02, 2022 10:19 am

same here works no issue .
Gacunme
Posts: 1
Joined: Wed Nov 24, 2021 7:45 am

Re: Solder points BLE 3.2?

Postby Gacunme Tue Jul 05, 2022 8:46 am

drift boss
Hello, I was sending you a email, I was not possible to post pictures here, I also have a copy of MiDu-Flasher_v1. 0.4 for automatic downgrade from ST-LINK if you need
Can you send it to me too? [email protected]
Mykola
Posts: 1
Joined: Tue Sep 20, 2022 10:38 am

Re: Solder points BLE 3.2?

Postby Mykola Tue Sep 20, 2022 10:49 am

Нужно ли по процедуре перекрошивки впаять на место этот конденсатор ?

Is it necessary to solder this capacitor into place according to the re - crumbling procedure ?

Return to “Xiaomi Scooters”

Who is online

Users browsing this forum: No registered users and 32 guests