Solder points BLE 3.2?

[probablylost]

Hello.
I have a Mi Pro2 manufactured 02/21 that I want to downgrade with st link. It has a V3.2 BLE I am having trouble finding a picture of solder points? it does not have the three points on the right of the board but has them above the switch, same? And does a resistor need to be removed on this model? thank you!

[probablylost]

Me again

So I thought i'd give it a go and tried those points on my BLE (1.5.7) and found then removed the c2 resistor on the back of the board.

When running the blePROrec script it cannot connect to target. So I guess i've got something wrong. STlink is powering the device and drivers installed.
Any help would be appreciated. Thanks

[Janebo81]

Hello, I was sending you a email, I was not possible to post pictures here, I also have a copy of MiDu-Flasher_v1. 0.4 for automatic downgrade from ST-LINK if you need

[Valichella]

Can you send it to me too, please. Also want to downgrade BLE from 1.5.5 but didn't find how to connect my BLE to st-link.

[oquska]

Solder pins are seems okey but i wasn't sure about c2 transistor. Can anyone successfully flashed this Ble point us to right directions?

[mober]

I have been able to downgrade BLE 157 to BLE 090 the BLE_V3.2 board with a ST-Link, removing this capacitor marked in the image.

[misiozol]

same here works no issue .

[Gacunme]

drift boss
Hello, I was sending you a email, I was not possible to post pictures here, I also have a copy of MiDu-Flasher_v1. 0.4 for automatic downgrade from ST-LINK if you need

Can you send it to me too? [email protected]

[otis]

Hello, I was sending you a email, I was not possible to post pictures here, I also have a copy of MiDu-Flasher_v1. 0.4 for automatic downgrade from ST-LINK if you need

hi, can you send it to me too, i also want to automatically downgrade from ST-LINK among us framed game

[Mykola]

Нужно ли по процедуре перекрошивки впаять на место этот конденсатор ?

Is it necessary to solder this capacitor into place according to the re - crumbling procedure ?