Hello everybody,
Im sorry for my Bad englisch im from germany. 3 months ago I bought a ninebot es1ld. However, this has no Bluetooth and apparently a different controlboard than the ES1. Now I wanted to remove the 20KmH lock on this scooter. And wanted to ask if there is a custom firmware for this scooter. A Bluetooth dashboard does not connect to the ESC. I have programming experience.
I thank you in advance
Hacking Ninebot ES1LD
Re: Hacking Ninebot ES1LD
Only way to replace controller and display from ES1, cost of about ~50e and DIY your self ;)
- keithanderson
- Posts: 1
- Joined: Sat Dec 25, 2021 9:31 am
Re: Hacking Ninebot ES1LD
Many thanks for the suggestion, is there really no other way?Only way to replace controller and display from ES1, cost of about ~50e and DIY your self ;) drift boss
Re: Hacking Ninebot ES1LD
es1ld Ninebot has a different console than ES1. And its control board doesn't connect to ESC. Want to fix it yourself? It's risky, take it to a car dealer or service agent, they will help you because they have expertise fleeing the complex
- jordanlaris
- Posts: 1
- Joined: Thu Sep 15, 2022 3:14 am
Re: Hacking Ninebot ES1LD
With cheap cost, you should replace controller and display from ES1. But doing it yourself can be risky death run 3d
Re: Hacking Ninebot ES1LD
You can't simply swap the dashboard and controller from an ES1 to this scooter due to the lack of hall sensor on the motor. This scooter runs a sensorless 3 phase motor with no ble. The pin out, however is the same as the ES1-4 escWith cheap cost, you should replace controller and display from ES1. But doing it yourself can be risky death run 3d
(pcb ESC2-L) and can be flashed using your ST-link 😉
Return to “Ninebot ES and E-series”
Who is online
Users browsing this forum: No registered users and 3 guests