ES4 start but no run

Danyparis
Posts: 2
Joined: Fri Jun 18, 2021 1:27 am

ES4 start but no run

Postby Danyparis Fri Jun 18, 2021 1:40 am

Hello guys
I found a old ES4
After changing all parts ( Controller and Display) the scoot start but no run
I have 0 error
When i push the break the rear led flash

I had try to change the front wheel by the same model and it’s the same problem
What i need to do ?
I have S/N into motherboard
All parts are new !!!

Motherboard, dash, and the 2 switchs

I had try with motor from Hoverboard and it’s the same problem

Thank you
And sorry for my bad english
Danyparis
Posts: 2
Joined: Fri Jun 18, 2021 1:27 am

Re: ES4 start but no run

Postby Danyparis Fri Jun 18, 2021 2:55 am

Solved
Thanks
tanidani
Posts: 3
Joined: Fri Aug 20, 2021 8:39 am

Re: ES4 start but no run

Postby tanidani Tue Aug 24, 2021 3:25 pm

The internal battery created problems and I open to create a new battery.
Now the internal battery is without BMS.
I created a new Custom Firmware from https://esx.cfw.sh/classic using the ES4 1.5.1 with the StealthMode activated, just to not check for BMS.
After flashing, with the ESx firmware code: sjvpfguhd2 I have 2 problems:
1.- I canot flash BLE. I canot return to original DRV or BLE.
2.- I dont have speed. I press the acceleraton and nothing. I move manual the scooter and the DashBoard show the speed. NO any allarm or error.
I read here that I must change Serial Number. I changed from the original N2LBH1842C0016 to N2GSD1111C0016 but nothing happend.

Please, say me how you solve the problem, maybe is the same reason in my situation.


Thanks in advance,

Daniel

Return to “Ninebot ES and E-series”

Who is online

Users browsing this forum: No registered users and 35 guests