That hardware mod is only for internal battery, right? Are you using only internal battery with increased voltage or external as well? How do you increase voltage on external battery?Yes I agree 55 km / h I think that would give even more but esmax free software limits more than 55 Ikm I think that you can have other versions of the software on the external and internal battery and do not communicate with the controller eat the software esrolback tool to bms 1.22 firmware too to 1.22 then doing updates updraguje you external batteries do it only when soft is also lower in the external battery on the bank is old bms eg 1.3.6 or 1.22 is written by Google translator so not everything can be a super legible esrolback application check all modloly scooters and software version and other useful things you can find at https://mimod.ru/en_US/
Everything zelezy since mosfet what you have are on 64 85 I 100 v theoretically having the last you can give on the engine and 90 v conference needs someone who will tell me how to remove the speed limits from the software are discounted, but they are actually set at 45km / h above 50 km
I gave, of course, bigger capacitors 1000 nf 63v can be without them but thanks to the capacitors we have a voltage supply. Larger voltage gives a smaller A on the connectors from what I calculated instead of 25 A as in the original we have at power 1000W only 16A on the cables if you want to give more V you need to increase capacitors on 85 or 100v but reduce the capacity so that they fit into the housing
Same in Polish below:
Ta przeróbka jest dla wewnętrznej baterii, prawda? Jeździsz tylko na samej wewnętrznej i dołożonej 4s4p aby podnieść napięcie czy masz też zewnętrzną beterię podpiętą? Nie mogę do Ciebie napisać wiadmości prywatnej - możesz spróbować do mnie napisać?