(TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Changer_E22E
Posts: 3
Joined: Wed Jul 20, 2022 5:26 pm

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby Changer_E22E Sat Jul 30, 2022 10:43 am

Goodmorning,
i have my E22E bricked with code E45D. I want to flash the fulldump file with my ST-link V2
I have edited the HEX of esc255_fulldump.bin at address 9020 withmy original code.
Now what i have to do?
I open the edited fulldump file with STM32 ST-LINK Utility and burn the firmware?
Please Help me, there is not a step by step guide for E22E
Thank you
devinoff
Posts: 1
Joined: Sat Aug 27, 2022 3:42 pm

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby devinoff Sat Aug 27, 2022 3:46 pm

Hi there,

I know it's been a long time since post creation, though I want to know is this still working?
And then, can I return ESC Sn to N2GG and will it work as before? Aand will it be possible to find out that I've been doing that?

Thank you, :>
TehnoCraft2010
Posts: 1
Joined: Sun Aug 28, 2022 6:45 am

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby TehnoCraft2010 Sun Aug 28, 2022 7:33 am

Hello,

Big Thanks for all who is involved in this information thread! :) Maybe someone can help me with E45D ninebot flashing ?

Early i received SEGWAY NINEBOT E45D with external battery, but this device max speed is only 20 Km/h :( when going up to hill scooter goes slowly (even when sport mode is enabled :(

I don't really want super speeds, just 25 km/h would be little faster and little enough for me :)

unpacking new scooter i installed ninebot app and accidentally :) automatically :) :) clicked on firmware update so my scooter now have this data:
Drv 2.7.5, master control 2.6.15, ble 2.1.3, bms 1.6.0, battery 2: 1.6.0.
I tried flashing (load original 2.7.1) from scooterhacking utility, also tried another windows 10 and android apps: ninebot flasher, iap, xiaflasher - no results ! SN can't be changed and flashing all official firmwares i get error: update failed! reason: data format error

Question 1:
Also i see that in manual (viewtopic.php?f=6&t=346) there is requirements for bluetooth and bluetooth version must be 5.0 and higher ! But i have android phone with BT version 4.0 and windows 10 bluetooth adapter also with 4.0 version! - Maybe due to my bluetooth version i can't normally flasing device ? It is variant that today i pickup form store new BT adapter with higher version and give a try ! :)

Question 2:
Maybe there is an option to restore factory settings with factory firmware ?

Big Thanks !
Daftpankus
Posts: 1
Joined: Thu Sep 01, 2022 10:03 am

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby Daftpankus Thu Sep 01, 2022 10:13 am

Hello. After flashing e22 using stlink v2 with esc255_fulldump.bin - the dashboard does not work, when the button is turned on - nothing is displayed on the screen, the taillight of the scooter flashes several times. What could go wrong?
Pepeanuts
Posts: 1
Joined: Thu Sep 15, 2022 12:03 pm

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby Pepeanuts Thu Sep 15, 2022 12:06 pm

Hi, i have my new E45E. This method still working ?
BLE 2.0.6
DRV 2.5.0
BMS 1.5.6
eBMS 1.5.6

Can i change region without any downgrade ? after changing region can i use Segway app to update drv/firmware
User avatar
F0xMaster
Posts: 68
Joined: Fri Jan 10, 2020 10:33 am
Location: Poland

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby F0xMaster Thu Sep 15, 2022 4:17 pm

Hi, i have my new E45E. This method still working ?
BLE 2.0.6
DRV 2.5.0
BMS 1.5.6
eBMS 1.5.6

Can i change region without any downgrade ? after changing region can i use Segway app to update drv/firmware
Region changing should work just fine on these firmware versions, though I'd recommend updating to DRV2.5.5 using ScooterHacking Utility since 2.5.0 is quite broken.
HLS001
Posts: 1
Joined: Tue Sep 27, 2022 10:17 am

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby HLS001 Tue Sep 27, 2022 10:21 am

Hello,

Big Thanks for all who is involved in this information thread! :) Maybe someone can help me with E45D ninebot flashing ?

Early i received SEGWAY NINEBOT E45D with external battery, but this device max speed is only 20 Km/h :( when going up to hill scooter goes slowly (even when sport mode is enabled :(

I don't really want super speeds, just 25 km/h would be little faster and little enough for me :)

unpacking new scooter i installed ninebot app and accidentally :) automatically :) :) clicked on firmware update so my scooter now have this data:
Drv 2.7.5, master control 2.6.15, ble 2.1.3, bms 1.6.0, battery 2: 1.6.0.
I tried flashing (load original 2.7.1) from scooterhacking utility, also tried another windows 10 and android apps: ninebot flasher, iap, xiaflasher - no results ! SN can't be changed and flashing all official firmwares i get error: update failed! reason: data format error

Question 1:
Also i see that in manual (viewtopic.php?f=6&t=346) there is requirements for bluetooth and bluetooth version must be 5.0 and higher ! But i have android phone with BT version 4.0 and windows 10 bluetooth adapter also with 4.0 version! - Maybe due to my bluetooth version i can't normally flasing device ? It is variant that today i pickup form store new BT adapter with higher version and give a try ! :)

Question 2:
Maybe there is an option to restore factory settings with factory firmware ?

Big Thanks !
Hi TehnoCraft2010,

Did you find a solution for this?
I have the same issue.

Thanks!
dino660112
Posts: 3
Joined: Thu Oct 13, 2022 1:50 am

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby dino660112 Thu Oct 13, 2022 1:58 am

Is anybody working on a firmware for the ninebot air t15? Or anybody knows if the firmware Is the same as the e serietà?
wanna now it too, do you got the solution already?
Daniel.xr1
Posts: 2
Joined: Wed Oct 26, 2022 8:50 am

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby Daniel.xr1 Wed Oct 26, 2022 12:59 pm

So after changing to N2GQ S/N with my E25A with external battery. I reach 28km/H freewheeling and still stuck on 25km/H on the ground, about 26km/H in a slight decline.

I can't really to seem out why, any pointers?
kitqeb
Posts: 1
Joined: Sat Mar 18, 2023 11:19 am

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby kitqeb Sat Mar 18, 2023 11:24 am

Yup same here. Stuck at 26kmh on ground using 'Q' for my e22d. I mean it's better than the 20kmh I had before but it really sounds like the motor is capable of more power.
Does anyone know if there's a custom firmware coming soon?
And also, would it work to just change the board to a ES one? With ES dash and E motor?

Return to “Ninebot ES and E-series”

Who is online

Users browsing this forum: Bing [Bot] and 5 guests