How to flash your Ninebot Scooter

giorgiot
Posts: 2
Joined: Fri Jul 19, 2019 10:05 am

Re: How to flash your Ninebot Scooter

Postby giorgiot Fri Jul 19, 2019 10:07 am

Hey all!
first of all: great guide. I followed it and all went (almost) flawlessly.

A question about the "almost": I dont understand if I'm supposed to put capacitor C15 back in place after completing the flash.

I didn't but I'm having some problems, in particular: power button doesnt work and top speed is 25 when custom firmware says it should be 32.

Thanks
TaiTheGuy
Posts: 3
Joined: Thu Jul 18, 2019 11:07 am

Re: How to flash your Ninebot Scooter

Postby TaiTheGuy Fri Jul 19, 2019 11:49 am

Hey all!
first of all: great guide. I followed it and all went (almost) flawlessly.

A question about the "almost": I dont understand if I'm supposed to put capacitor C15 back in place after completing the flash.

I didn't but I'm having some problems, in particular: power button doesnt work and top speed is 25 when custom firmware says it should be 32.

Thanks
No, the cap does not get replaced.
I've seen others w/power button issues (not sure why).
Perhaps ur motor/batt aren't capable of "32".or is just a kmh/mph issue? Even tho neither of those #s equal the other when converted, so idk
giorgiot
Posts: 2
Joined: Fri Jul 19, 2019 10:05 am

Re: How to flash your Ninebot Scooter

Postby giorgiot Fri Jul 19, 2019 1:08 pm

Thanks for confirming I did the right procedure!
I guess I will have to buy a new dashboard :-(
Justinmarrugi
Posts: 1
Joined: Tue Jul 23, 2019 11:28 pm

Re: How to flash your Ninebot Scooter

Postby Justinmarrugi Tue Jul 23, 2019 11:30 pm

Is there anyway i can flash my scooter with ubuntu OS i dont have a windows computer but i do have a tablet with a otg usb is it possible
User avatar
UgloBuglo
Posts: 24
Joined: Sat Jul 13, 2019 9:40 pm
Location: Sweden

Re: How to flash your Ninebot Scooter

Postby UgloBuglo Wed Jul 24, 2019 12:09 pm

Is there anyway i can flash my scooter with ubuntu OS i dont have a windows computer but i do have a tablet with a otg usb is it possible
I haven't tried it myself, but it should be possible;

https://fishpepper.de/2016/09/16/instal ... -on-linux/
User avatar
fivefingerdiscount
Posts: 18
Joined: Sun Jul 28, 2019 2:20 pm

Re: How to flash your Ninebot Scooter

Postby fivefingerdiscount Sun Jul 28, 2019 2:25 pm

This procedure is to flash the dash board, but what about the second box on Spin scooter (got from auction) that have their gps and SIM card. ?
Last edited by fivefingerdiscount on Mon Aug 26, 2019 3:04 am, edited 1 time in total.
I paid for dis shyt!
tuco2
Posts: 2
Joined: Sat Jul 06, 2019 2:37 pm

Re: How to flash your Ninebot Scooter

Postby tuco2 Mon Jul 29, 2019 4:32 pm

Fantastic, my scooter is ok
Tranks!
cenfl
Posts: 1
Joined: Tue Aug 20, 2019 12:55 am

Re: How to flash your Ninebot Scooter

Postby cenfl Tue Aug 20, 2019 12:57 am

This procedure is to flash the dash board, but what about the second box on Spin scooter (got from auction) that have their gps and SIM card. ? Does flashing the dash board will brick the motor controller or anything eles or this straight forward to flash “any dashboard” and nothing eles would affects by it
You can throw away the second box on your Spin scooter that has the GPS, you don't need it. After you flash the dashboard, you need to flash the control board via ES_DownG(Android) or Ninebot-Flahser(Windows). After that enjoy your ride.
Ronco1986
Posts: 1
Joined: Wed Aug 21, 2019 10:50 am

Re: How to flash your Ninebot Scooter

Postby Ronco1986 Wed Aug 21, 2019 11:16 am

Hi all,
Thank you for the very detailed guide.
I've got a question regarding the applicability of the procedure on a ninebot es2 lite (limited to 20km/h).
Fortunately I could already connect to the scooter via Es_downG without any modification to the dashboard.

Do you see any potential conflict or risk if flashing the custom firmware on the es2 lite?

Did anyone try the procedure on a es2 lite?

Thank you in advance for your feed-back!
housi
Posts: 3
Joined: Fri Aug 23, 2019 12:36 pm

Re: How to flash your Ninebot Scooter

Postby housi Fri Aug 23, 2019 12:52 pm

Hello, I've been trying to flash ES2 dash with my nucleo64 (nucleo-l476rg) external st-link. It is using st-link v2-1, which should be backwards compatible, from what I've read. I've followed instructions and tried to use 2 different win10 machines to do it, with same result. Any ideas what to do?

C:\Users\Sonia\Downloads\openocd-0.10.0\openocd-0.10.0>.\bin-x64\openocd.exe -f .\scripts\interface\stlink-v2-1.cfg -f .\scripts\target\nrf51.cfg

Open On-Chip Debugger 0.10.0
Licensed under GNU GPL v2
For bug reports, read http://openocd.org/doc/doxygen/bugs.html

Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'.
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
adapter speed: 1000 kHz
Info : Unable to match requested speed 1000 kHz, using 950 kHz
Info : Unable to match requested speed 1000 kHz, using 950 kHz
Info : clock speed 950 kHz
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Info : STLINK v2 JTAG v28 API v2 SWIM v17 VID 0x0483 PID 0x374B
Info : using stlink api v2
Info : Target voltage: 3.259513
Info : nrf51.cpu: hardware has 4 breakpoints, 2 watchpoints

image of my nucleo setup:
https://photos.app.goo.gl/tHSRanzgBJnmQozq8

Return to “Ninebot ES and E-series”

Who is online

Users browsing this forum: No registered users and 9 guests