Re: [UPDATED] Activate a new controller / change serial number (BLE, ST Link)
Posted: Tue Aug 24, 2021 1:47 pm
I have 2 years now a ES4.
The internal battery created problems and I open to create a new battery.
Now the internal battery is without BMS.
I created a new Custom Firmware from https://esx.cfw.sh/classic using the ES4 1.5.1 with the StealthMode activated, just to not check for BMS.
After flashing, with the ESx firmware code: sjvpfguhd2 I have 2 problems:
1.- I canot flash BLE. I canot return to original DRV or BLE.
2.- I dont have speed. I press the acceleraton and nothing. I move manual the scooter and the DashBoard show the speed. NO any allarm or error.
I read here that I must change Serial Number. I changed from the original N2LBH1842C0016 to N2GSD1111C0016 but nothing happend.
Any suggestions ???
Thanks in advance,
Daniel
The internal battery created problems and I open to create a new battery.
Now the internal battery is without BMS.
I created a new Custom Firmware from https://esx.cfw.sh/classic using the ES4 1.5.1 with the StealthMode activated, just to not check for BMS.
After flashing, with the ESx firmware code: sjvpfguhd2 I have 2 problems:
1.- I canot flash BLE. I canot return to original DRV or BLE.
2.- I dont have speed. I press the acceleraton and nothing. I move manual the scooter and the DashBoard show the speed. NO any allarm or error.
I read here that I must change Serial Number. I changed from the original N2LBH1842C0016 to N2GSD1111C0016 but nothing happend.
Any suggestions ???
Thanks in advance,
Daniel