Convert Bird 3 to Personal
Convert Bird 3 to Personal
I'm completely new to scooter hacking and I got a decommissioned Bird 3 scooter from an auction. What's the easiest way to convert it to a personal scooter? I've looked around but most of the tutorials seem outdated or unclear. Any help is greatly appreciated!
Re: Convert Bird 3 to Personal
is this a bird ninebot es4 es3 ??
Re: Convert Bird 3 to Personal
Buy st link v2. Find the firmware you want to install in .bin format. Find a photo of the printed circuit board on which the contacts of the programmer (swdio swdclk) are signed, if you do not find it, then look for the legs with which controller and multimeter. Connect the programmer to the board. When connecting, the program may have errors. In short about them, there are three of them:
1 usb error
2 enable connect under reset
3 you are trying to firmware the controller STM32W1x... Turn on normal.
There is nothing wrong with that. I solved this problem by repeatedly connecting in normal mode with simultaneous power supply from the programmer (ninebot similar to es4). Everything from esc is off! Now looking for the dash bord firmware. I haven't found it yet. When disassembling the dash, examine the programming contacts, perhaps you were lucky and did not flash the dash. Naturally, then completely disassemble the mechanics and re-service, change something.
1 usb error
2 enable connect under reset
3 you are trying to firmware the controller STM32W1x... Turn on normal.
There is nothing wrong with that. I solved this problem by repeatedly connecting in normal mode with simultaneous power supply from the programmer (ninebot similar to es4). Everything from esc is off! Now looking for the dash bord firmware. I haven't found it yet. When disassembling the dash, examine the programming contacts, perhaps you were lucky and did not flash the dash. Naturally, then completely disassemble the mechanics and re-service, change something.
- armandseaman
- Posts: 1
- Joined: Wed Sep 27, 2023 3:48 pm
Re: Convert Bird 3 to Personal
I thoroughly enjoyed reading your content, and it was quite beneficial to me.
geometry dash unblocked
geometry dash unblocked
Re: Convert Bird 3 to Personal
It's awesome that you're diving into the world of scooter hacking. My advice would be to start by researching the specific Bird 3 model you have, as different scooters might have varying methods for conversion.
jumping shell
jumping shell
Re: Convert Bird 3 to Personal
I also really enjoyed learning about Bird 3, it's really interestingIt's awesome that you're diving into the world of scooter hacking. My advice would be to start by researching the specific Bird 3 model you have, as different scooters might have varying methods for conversion.
Snow Rider 3D
Return to “Ninebot ES and E-series”
Who is online
Users browsing this forum: No registered users and 5 guests