(TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Mullenöh
Posts: 1
Joined: Thu Dec 30, 2021 5:43 pm

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby Mullenöh Thu Dec 30, 2021 10:34 pm

Hi everyone. New here.. I tried to perform unlocking on my E22E without success. I can't find out what I am doing wrong.
I take a chance and hope that maybe some wise people in here can help me understand.

I have used the scooterhacking utlility app on an Android unit.
I performed the procedure described under "VERY IMPORTANT" on page 1.
I have not tried to perform anything connected to esx.cfw.sh
I have tried different regions, I get clear signal every time, but I never get the scooter to go any faster than 20 km/h (except downhill where it once reached 23 km/h).
I drive it in sports mode (red S)

What am I doing wrong?

Appreciate any help. Thanks.
Susan
Posts: 1
Joined: Mon Feb 07, 2022 11:59 am

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby Susan Mon Feb 07, 2022 12:07 pm

Hello. It all worked out for me. True, not at the first time... It's great that I found this forum ! Thank you :)
TastyChimera
Posts: 1
Joined: Sat Feb 19, 2022 9:37 pm

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby TastyChimera Sat Feb 19, 2022 9:42 pm

Hey all. First off, thanks to everyone responsible for putting this together.

I would like to let you all know that changing the serial number on the E22 didn't require downgrading for me.
It would seem that "Ninebot Flasher" doesn't work if the firmware is up to date, BUT! "Ninebot IAP"? Changed it the first try, didn't even take multiple clicks like it did the first time I changed it with "Ninebot Flasher" before I updated the firmware.

Just wanted to let you know that "Ninebot IAP" will change the serial number on up-to-date scooters. At least it did for me.
Pedro Ferreira
Posts: 1
Joined: Sun Feb 27, 2022 2:41 am

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby Pedro Ferreira Sun Feb 27, 2022 3:19 am

Hi Guys,

I hope you are doing well.

So I installed the XIAO FLASHER, I dont know if is the same like ninebot flasher. I installed the app, I followed all the steps, and sellected the option (30kmh) and the scooter actually rechead the 25 Kmh. I decided to establish the original features just to check if is everything ok.

I noticed my SE change, I tried the custom option and write my original and manufacturer SE but nothing change. I tried at least to times.
So then, I tried to put again the option 30 KMH but once again nothing change. My Limit still in 20 KMH. Then I open the ninebot app and I noticed that I have 3 scooters models in my profile. Non of them is my scooter. I have one E45D and one E25A, and my scooter is a E22E.

I want to turn back and put the initial figures, such as my SE and the layout of my app and have the right scooter on my profile.

Can someone please help with this subject?

Jesus, I am scared, I take this scooter from Christmas.

Waiting for future answers.

Thanks in advance.

Regards.
CYD
Posts: 1
Joined: Sat Mar 05, 2022 9:24 pm

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby CYD Sat Mar 05, 2022 9:32 pm

Hello
I just get a E45D in Switzerland wich speed limit is 20Km/h
I tried every methods of this tuto but it doesn't work.
When I trie ti flash a compatible DRV, the process stop at 0,3% with this message:

> Flashing failed
> Update failed!
> Reason: Unknown error
> Power cycling your phone & vehicle might help

I retried many times, reboot, charge, ...
Nothing work, could you help me please?

Thanks
User avatar
F0xMaster
Posts: 68
Joined: Fri Jan 10, 2020 10:33 am
Location: Poland

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby F0xMaster Sun Mar 06, 2022 10:46 am

Hello
I just get a E45D in Switzerland wich speed limit is 20Km/h
I tried every methods of this tuto but it doesn't work.
When I trie ti flash a compatible DRV, the process stop at 0,3% with this message:

> Flashing failed
> Update failed!
> Reason: Unknown error
> Power cycling your phone & vehicle might help

I retried many times, reboot, charge, ...
Nothing work, could you help me please?

Thanks
A workaround is in the works. Currently there is nothing you can do.
DarKMaN
Posts: 2
Joined: Mon Mar 07, 2022 12:36 pm

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby DarKMaN Mon Mar 07, 2022 12:41 pm

Where can we be enlightened when a new firmware comes out? in scooterhackapp or here ??

best regards DarKMaN
pain2u2
Posts: 1
Joined: Fri Mar 11, 2022 2:55 pm

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby pain2u2 Fri Mar 11, 2022 3:14 pm

Hello
I just get a E45D in Switzerland wich speed limit is 20Km/h
I tried every methods of this tuto but it doesn't work.
When I trie ti flash a compatible DRV, the process stop at 0,3% with this message:

> Flashing failed
> Update failed!
> Reason: Unknown error
> Power cycling your phone & vehicle might help

I retried many times, reboot, charge, ...
Nothing work, could you help me please?

Thanks
A workaround is in the works. Currently there is nothing you can do.
Okay that sounds great!
My son happened to update my Ninebot to the latest version 2.6.13, and then the RGB option disappeared and 30km / h was limited to 20km / h.
So I desperately hope that a solution is close :-)
romanro91
Posts: 2
Joined: Fri Mar 11, 2022 8:10 pm

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby romanro91 Fri Mar 11, 2022 8:25 pm

Hello everyone.

I'm in little trouble with my original e25e ninebot. After installing xiaoflasher I selected option 30km/h and everything went wrong. My front and back lights started blinking next few hours every time when I tried to turn scooter on. Later everything was fine but after that my serial number of scooter changed and on Segway official app he is now registered as e45d model. Now it is 20 km/h instead my original 25km/h and I cannot use my lighting effects. On xiaoflasher app my ninebot is now registered to limited 20km/h and I cannot change it. I also payed donation for the xiaoflasher app.

Thanks in advance.
Cheers
DarKMaN
Posts: 2
Joined: Mon Mar 07, 2022 12:36 pm

Re: (TUT) Unlocking the Ninebot E-series (E22, E25, E45) to 28 km/h (30 on E45)

Postby DarKMaN Sun Mar 13, 2022 3:52 pm

Hi .. I'm new on this forum. and i bought a E25D and I trying out with xiaoflasher app on android, and works good,29kmh : D... then I try use segways app and of misstake I update the firmware to the latest, So now back to 20kmh... i try use hacking app again, but I get the issue message

> Flashing failed
> Update failed!
> Reason: Unknown error
> Power cycling your phone & vehicle might help

I can understand its the official segway app has locked the settings, I donated 3times so I hope it wil coming walkround software near futures

Return to “Ninebot ES and E-series”

Who is online

Users browsing this forum: No registered users and 10 guests