ScooterHacking.org

Hi,

I received today my new Ninebot F2 Plus and this shall be the replacement for my Xiaomi MI365.
Of course I tried to connect with Scooterhacking tool the new scooter but was unsuccessful. Is there a plan when the tool will support this model. By the way the F2 Plus seems to be a nice alternate to the G30 and a fully different level compared with the MI365

Hi,

I received today my new Ninebot F2 Plus and this shall be the replacement for my Xiaomi MI365.
Of course I tried to connect with Scooterhacking tool the new scooter but was unsuccessful. Is there a plan when the tool will support this model. By the way the F2 Plus seems to be a nice alternate to the G30 and a fully different level compared with the MI365

Hi. Try this
I saw on YouTube they did this with a fresh g2 max, and they are with the same release date, but there is a possibility that it may not work

1. In the native application.
2. Check that the controller version is higher than 131
3. Download BLE Scanner from the market and connect
4. We are looking for the attribute "6E4000 ....." and click on the "W" button
5. Copy without quotes "55AB4D41583253636F6F7465725F31", paste into the window by selecting "Byte Array". we do this two more times.
6. Close the scanner and go to the native application
in the settings, S mode settings and a couple of times we move the strip / lever back and forth 5 times until it gives an error / there will be a crash
7. Back to stock - all the same, but 55AB4D41583253636F6F7465725F30 (end 0)

Up.
it didn't work on F2 Pro lastest firmware.

I'm really hoping in a "scooterhacker" way to edit it

Congratulations on your new Ninebot F2 Plus scooter!

Hi,

I have the F2 Pro D with firmware 1.4.7 locked at 20kph.

When trying to change region / serial the scooter beeps in a denying manner, no change is performed.

Any other way to change region / speed? Is it possible to downgrade firmware to before the region change was locked?

Thanks.