Hello / Good evening after a lot of research I found a very simple solution that works even after updating (mandatory) the P65/100 models. below there is a video which shows the procedure to follow it is necessary to download a Chinese application (which you find attached) and it is enough to modify the serial number which ends a by 1 and replaced by 0
For the translation :
1.) Install apk only on Android !
2.) Turn on the scooter and launch the app
3.) You will find it listed log in
4.) New page go to "Unknown Service"
5.) Download the second "Unknown Characteristic" package
6.) New page where you change the last digit 1 to 0
7.) PRESS HEX IT MUST BE ACTIVATED (in the video it is already activated)
8.) To validate you just have to press at the bottom right on the red Chinese characters
9.) Reboot and Envoy
!!! Watch the video from 2:09 min !!!
https://youtu.be/OGFArdkTnoY
BLE APK:
https://drive.google.com/file/d/1DDEH8p ... PmqN7/view
PS: P65E 40/45km/h | P100SE 50/55km/h
TUTO Model P Série Unlock Speed
Return to “Other Ninebot Scooters”
Who is online
Users browsing this forum: No registered users and 94 guests