Everything i know so far: The BMS will work as long as the original Controller is connected, and will allow you to draw max amps, the Battery is impossible to Open and uses Samsung 50e Cells, it is 48V, the Motor doesn’t run very well on a G30 or other Scooters, due to its special winding, it is optimised on 20KMH on 48V, so it runs accordingly, i also know that the Controller uses an AT chip, there is Max G30 Firmware for AT tho, the Scooter has one GPS tracker in the Front, and a really nice display, i am hoping to get it working as well, i took the scooter already apart and made some pictures of the ESC so you can help me identify the Programming pads, i am really looking forward[] on getting the Controller and Display to work, but i think if the Controller doesnt have rental FW on it the Battery wont unlock, the turning signals could work on G30 firmware because the Turning relais are on the Controller not like on the SNSC 2.3.
I would really like to get more information regarding this scooter, so please drop down your knowledge.
:)