Segway C1 Conversion, aka TIERS new scooter

[Spoooky]

Hello, as you may have already noticed Tier changed their fleet models from Okai to segway, i am interested in converting these scooters and posting a tutorial just like my SNSC post.


Everything i know so far: The BMS will work as long as the original Controller is connected, and will allow you to draw max amps, the Battery is impossible to Open and uses Samsung 50e Cells, it is 48V, the Motor doesn’t run very well on a G30 or other Scooters, due to its special winding, it is optimised on 20KMH on 48V, so it runs accordingly, i also know that the Controller uses an AT chip, there is Max G30 Firmware for AT tho, the Scooter has one GPS tracker in the Front, and a really nice display, i am hoping to get it working as well, i took the scooter already apart and made some pictures of the ESC so you can help me identify the Programming pads, i am really looking forward[] on getting the Controller and Display to work, but i think if the Controller doesnt have rental FW on it the Battery wont unlock, the turning signals could work on G30 firmware because the Turning relais are on the Controller not like on the SNSC 2.3.

I would really like to get more information regarding this scooter, so please drop down your knowledge.
:)

[NeoGamer911]

.

[NeoGamer911]

.

[rlambert2721]

I am also looking on conversion information as well but also just being able to charge it. The chargers I have for other scooters do not fit this one and I am unsure on what charger this one uses.

[Azescooter]

Hey guys any more or new information about converting this scooter

[kathy]

Since the original battery uses Samsung 50e cells and is 48V, it's important to ensure that any modifications or replacements you make are compatible in terms of voltage, capacity, and cell type. among us

[Rayce1974]

Good luck with your project, and I hope your conversion turns out successful!

[Muffpillow]

Also undertaking this daunting task as we speak. Will definitely update on progress especially if we don’t see anything else from OP.

[NeoGamer911]

I have some rather unfortunate news! It appears there's still a long way to go before a fully converted C1, with instructions and files, will be available publicly. Segway seems to be prioritizing security to a new level after the SNSC 2.3 scandal, which, if you think about it, is a good thing. For example, the battery is nearly impossible to open without using an angle grinder. Even if you manage to get it open, the grind marks will make it look really tacky.

In conclusion, I think it’s best to stick to retail scooters rather than rental ones, even if you manage to source them legally through a police auction or similar means.

[jonascoot]

For what do you need help? I got the scooter running without IoT and battery unlocked. Already gave it a new color it looks better in black. The scooter runs at about 35km/h