DRV 1.8.3 Problem

grahamjohnson10
Posts: 1
Joined: Wed Sep 22, 2021 12:44 pm

DRV 1.8.3 Problem

Postby grahamjohnson10 Tue Jul 19, 2022 8:42 pm

I have DRV 1.8.3 is there anyway I can downgrade as not only can I not downgrade the DRV I can not change serial number or region.
User avatar
F0xMaster
Posts: 68
Joined: Fri Jan 10, 2020 10:33 am
Location: Poland

Re: DRV 1.8.3 Problem

Postby F0xMaster Tue Jul 19, 2022 10:25 pm

The only way is using an ST-Link.
getupandfight
Posts: 1
Joined: Fri Aug 05, 2022 7:10 am

Re: DRV 1.8.3 Problem

Postby getupandfight Fri Aug 05, 2022 7:11 am

I have a MAX G30D II. Same issue mistakenly upgraded to 1.8.3. Instead of doing an ST Link that can brick the scooter, does anyone know if replacing the controller with a new one from AliExpress would fix the issue : https://www.aliexpress.com/item/1005002692831794.html ?

This one is for MAX G30D. haven;t found one specific for MAX G30D II.
dbangx
Posts: 2
Joined: Tue Aug 09, 2022 8:19 am

Re: DRV 1.8.3 Problem

Postby dbangx Tue Aug 09, 2022 9:33 am

Hi
I am new to scooters and in my haste upgraded the firmware throung ninebot app.

I have read a lot of posts - and one in particular caught my eye. It explained that the Firmware "block" lies with the BLE module (dashboard). Can anyone confirm this?

If so, shouldn't it be possible to buy a new dashboard or borrow one from a friend, temporarily mount it, then upgrade the firmware of the controller and afterwards swap back? All this without STlink?

I appologize if this is a stupid question.
User avatar
F0xMaster
Posts: 68
Joined: Fri Jan 10, 2020 10:33 am
Location: Poland

Re: DRV 1.8.3 Problem

Postby F0xMaster Tue Aug 09, 2022 2:02 pm


I have read a lot of posts - and one in particular caught my eye. It explained that the Firmware "block" lies with the BLE module (dashboard). Can anyone confirm this?
That statement is only true on Xiaomi scooters, and doesn't apply on Ninebots. And yes, I know Ninebot also makes Xiaomi scooters, however they don't use the same security techniques.
Ezgetap
Posts: 3
Joined: Sat Sep 03, 2022 12:48 am

Re: DRV 1.8.3 Problem

Postby Ezgetap Sat Sep 03, 2022 10:38 pm

Is there any hope that will be possible to install custom firmware with bluetooth on 1.8.3 or should I buy new controller
dbangx
Posts: 2
Joined: Tue Aug 09, 2022 8:19 am

Re: DRV 1.8.3 Problem

Postby dbangx Wed Sep 07, 2022 10:43 pm

Just finished replacing the controller in my g30d2. Ordered a new original from a webshop here in DK.
Now i can change region /serial number to US and it goes 30 kmh.

I am definately NOT a solder-guy :D
Ezgetap
Posts: 3
Joined: Sat Sep 03, 2022 12:48 am

Re: DRV 1.8.3 Problem

Postby Ezgetap Sat Sep 24, 2022 6:16 pm

Scooter hacking my ass
FargesFX
Posts: 1
Joined: Thu Oct 06, 2022 12:18 pm

Re: DRV 1.8.3 Problem

Postby FargesFX Thu Oct 06, 2022 12:24 pm

Just finished replacing the controller in my g30d2. Ordered a new original from a webshop here in DK.
Now i can change region /serial number to US and it goes 30 kmh.

I am definately NOT a solder-guy :D
Which DK shop did you use?
I am also in DK
I have been looking for a new controller, but can't original and a bit hesitant on buying a copy.
Exialz
Posts: 1
Joined: Fri Nov 04, 2022 2:21 pm

Re: DRV 1.8.3 Problem

Postby Exialz Fri Nov 04, 2022 2:31 pm

Hello, I also made the new update by mistake.

I'm currently with this:

BLE: 1.1.7
VRF: 1.8.3
BMS: 2.3.4

I tried to fiddle with Scooterhacking utility but nothing worked (data format error). I also tried with Xiaoflasher and Ninebotflasher)

I am now stuck in German (DE) and unable to change anything.

I hope SH will make an update to fix this but in the meantime does anyone have a solution please?

Return to “Ninebot Max”

Who is online

Users browsing this forum: No registered users and 37 guests