Hi All
i have G30 Max and i need to Dump the BLE firmware
I have 2 dashboard displays
one after trying to update BLE to lower CFW stooped working , i tried to flash it with all available firmwares on site, but it is not working
i am getting error 51 (firmware no compatible ).
the other dashboard display is working fine with no error
-- HOW CAN I CLONE THE FIRMWARE OF THE WORKING BLE (DASHBOARD DISPLAY) TO THE ONE THAT STOPPED WORKING
-- OR HOW CAN I MAKE FULL firmware DUMP OF THE WORKING DISPLAY SO I CAN FLASH IT TO THE OTHER ONE.
i tried this but no luck i used this to make DUMP
bin\openocd.exe -f share\openocd\scripts\interface\stlink-v2.cfg -f share\openocd\scripts\target\nrf51.cfg -c init -c "reset halt" -c "dump_image BLE.bin 0 0x40000" -c reset -c exit
AND this to flash it back
bin\openocd.exe -f share\openocd\scripts\interface\stlink.cfg -f share\openocd\scripts\target\nrf51.cfg -c init -c "reset halt" -c "nrf51 mass_erase" -c "program BLE.bin 0 verify" -c "program UICR 0x10001000 verify" -c reset
Please if anyone can help, i am sure there is something that i am not doing well
maybe there is another way to do it or other command.
i am not an expert i tried what i found on forum.
Thank you for your help
G30 Max, BLE Dashboard Firmware Dump --Need help with it
- PotatoBill
- Posts: 5
- Joined: Mon Apr 25, 2022 12:43 am
Re: G30 Max, BLE Dashboard Firmware Dump --Need help with it
Make sure the C2 capacitor is removed. Other than that, if the method works for one but not the other, it's likely a hardware issue, possibly the STM chip, I'm sure the cheap Chinese clone dash's use cheap chine clone chips.
Re: G30 Max, BLE Dashboard Firmware Dump --Need help with it
hi
thanks for replay,
the board is original Segway, no clone
the C2 capacitor is removed,
but i am still not able to make a dump
every time i make dump of the firmware, the file size is OK but it is empty (no data in, all FFFFFFFF)
it is acting like it i reading the firmware but when saving it is writing zero data to the saving file.
i am not able to save the original firmware.
still waiting for someone who can help
thanks for replay,
the board is original Segway, no clone
the C2 capacitor is removed,
but i am still not able to make a dump
every time i make dump of the firmware, the file size is OK but it is empty (no data in, all FFFFFFFF)
it is acting like it i reading the firmware but when saving it is writing zero data to the saving file.
i am not able to save the original firmware.
still waiting for someone who can help
- dumbotwenty
- Posts: 8
- Joined: Thu Dec 29, 2022 1:32 am
Re: G30 Max, BLE Dashboard Firmware Dump --Need help with it
Exactly. It appears to be reading the firmware, however when saving, it writes 0 data to the saving file. I'm still not sure how to solve it completely.hi
thanks for replay,
the board is original Segway, no clone
the C2 capacitor is removed,
but i am still not able to make a dump
every time i make dump of the firmware, the file size is OK but it is empty (no data in, all FFFFFFFF)
it is acting like it i reading the firmware but when saving it is writing zero data to the saving file.
doodle cricket
i am not able to save the original firmware.
still waiting for someone who can help
Who is online
Users browsing this forum: No registered users and 7 guests