(TUT) Unlocking the full 30 kph (18.6 mph) top speed of the Ninebot Max (stock, four methods, updated early 2021)

User avatar
F0xMaster
Posts: 68
Joined: Fri Jan 10, 2020 10:33 am
Location: Poland

(TUT) Unlocking the full 30 kph (18.6 mph) top speed of the Ninebot Max (stock, four methods, updated early 2021)

Postby F0xMaster Wed Jun 17, 2020 12:13 pm

Hello, in this guide I will show you how to unlock the full potential of the stock Ninebot Max. This step is not necessary on the G30P and G30LP scooters, as they're unlocked from the factory.

Important info
  • This guide only works on bluetooth-enabled scooters
  • You will need a bluetooth-enabled Windows 10 PC or Android device.
  • This guide may not work on DRV145, if you want to change your region on DRV145 you might have to downgrade to DRV126.
  • Changing your serial number or version will NOT void your warranty, as long as you change it back for any warranty repairs.
Method 1 - Android device - ScooterHacking Utility.

Step 1 - Download the ScooterHacking Utility from https://scooterhack.in/utility
Step 2 - Turn on your scooter and connect to it using the app.
Step 3 - Select "change region", then "US".
For G30LE and G30LD scooters select "custom", and type in your current serial number, but change the first 4 characters to N4GN
You can also select "Speedboost" to implement the "golden" or "magic" serial number
Image
Image
The scooter will reboot. By this point it'll go 30 km/h. Enjoy the speed :)

Method 2 - Windows 10 PC, Ninebot Flasher

Step 1 - Download Ninebot Flasher from the Windows Store - https://bit.ly/Ninebot-Flasher
Step 2 - Turn on your scooter and connect to it using the app.
Step 3 - Your current serial number will be displayed (ESC SN), type it into the box in the middle of the screen (ALL CAPS), but change the first 4 characters to N4GS.
For G30LE and G30LD scooters use the N4GN prefix.
You can also change your SN to begin with N4GSD1111C, that will enable the full available speed (over 30 kph on some scooters).
Step 4 - Click Ctrl-A and press Write ESC SN TWICE, or until the serial number (ESC SN) gets changed.
Image
Step 5 - Restart your scooter and enjoy the speed :)

Method 3 - Windows 10 PC, Ninebot IAP

Step 1 - Download Ninebot IAP from https://iap.scooterhacking.org/get
Step 2 - Turn on your scooter
Step 3 - Go to BLE and click "Start scan", select your scooter and click "Connect"
Step 4 - Go to the "Tools" tab, and click "Read".
Wait until Output gives you the serial number and click "Change SN"
Step 5 - Type your current serial number into the box, but change the first 4 characters to N4GS, and click OK.
For G30LE and G30LD scooters use the N4GN prefix.
You can also change your SN to begin with N4GSD1111C, that will enable the full available speed (over 30 kph on some scooters).
Image
Step 6 - Restart your scooter and enjoy the speed :)

Donation links:
Majsi (Ninebot Flasher dev) - https://www.paypal.me/majsinko
Lothean (IAP/ScooterHacking Utility dev) - https://scooterhack.in/donate
Fox Master (Me) - https://scooterhack.in/donatefox
kave
Posts: 2
Joined: Thu Sep 08, 2022 7:36 am

Re: (TUT) Unlocking the full 30 kph (18.6 mph) top speed of the Ninebot Max (stock, four methods, updated early 2021)

Postby kave Sun Sep 11, 2022 5:03 am

Thank you. Is this working on a brand new model as well?
Fizzydrink
Posts: 1
Joined: Mon Oct 24, 2022 1:20 am

Re: (TUT) Unlocking the full 30 kph (18.6 mph) top speed of the Ninebot Max (stock, four methods, updated early 2021)

Postby Fizzydrink Mon Oct 24, 2022 1:22 am

Hi, I tried this with a Australian G30

The scooter does a couple of beeps and nothing else.
Doesn't reboot or anything.

The region does change in the app, but speeds remain the same?

Any idea? Cheers
GeoBot
Posts: 1
Joined: Mon Dec 20, 2021 4:43 pm

Re: (TUT) Unlocking the full 30 kph (18.6 mph) top speed of the Ninebot Max (stock, four methods, updated early 2021)

Postby GeoBot Thu Feb 02, 2023 2:22 pm

Sorry for the late answering. It will only work with a non-restricted firmware version. (e.g. DRV1.6.3 = or <)
If you try it with SHU, downgrade your BLE-Version to v1.1.4.
zoost7
Posts: 1
Joined: Sun Mar 26, 2023 10:37 am

Re: (TUT) Unlocking the full 30 kph (18.6 mph) top speed of the Ninebot Max (stock, four methods, updated early 2021)

Postby zoost7 Sun Mar 26, 2023 10:43 am

Hello I also have an Australian G30 Max.

I downgraded to BLE 1.1.4 as suggested. No change to top speed.

I also changed region to US, but no change in speed. Even though app says the region is changed.

Any ideas?
otisjame
Posts: 4
Joined: Sat Jul 22, 2023 7:27 am

Re: (TUT) Unlocking the full 30 kph (18.6 mph) top speed of the Ninebot Max (stock, four methods, updated early 2021)

Postby otisjame Sat Jul 22, 2023 7:34 am

Thanks for the information, I will try to figure it out for more.
Pizza Tower
cubero
Posts: 1
Joined: Tue Jul 25, 2023 2:57 am

Re: (TUT) Unlocking the full 30 kph (18.6 mph) top speed of the Ninebot Max (stock, four methods, updated early 2021)

Postby cubero Tue Jul 25, 2023 2:58 am

Your post is incredibly insightful and well-written.
Garten Of Banban
Maridns
Posts: 1
Joined: Tue Jul 25, 2023 10:08 am

Re: (TUT) Unlocking the full 30 kph (18.6 mph) top speed of the Ninebot Max (stock, four methods, updated early 2021)

Postby Maridns Tue Jul 25, 2023 10:10 am

Only an unrestricted firmware version will allow operation.
In order to test it out with SHU, you'll need to roll back to BLE version 1.1.4.
puppet hockey
larryellison
Posts: 1
Joined: Wed Aug 02, 2023 3:53 am

Re: (TUT) Unlocking the full 30 kph (18.6 mph) top speed of the Ninebot Max (stock, four methods, updated early 2021)

Postby larryellison Wed Aug 02, 2023 3:56 am

Ninebot Max actually has many features that we don't know yet. Need to find out if not really wasted geometry dash bloodbath
UshaDestination
Posts: 1
Joined: Sat Aug 26, 2023 8:50 am

Re: (TUT) Unlocking the full 30 kph (18.6 mph) top speed of the Ninebot Max (stock, four methods, updated early 2021)

Postby UshaDestination Sat Aug 26, 2023 8:54 am

Hello, in this guide I will show you how to unlock the full potential of the stock Ninebot Max. This step is not necessary on the G30P and G30LP scooters, as they're unlocked from the factory.

Important info
  • This guide only works on bluetooth-enabled scooters
  • You will need a bluetooth-enabled Windows 10 PC or Android device.
  • This guide may not work on DRV145, if you want to change your region on DRV145 you might have to downgrade to DRV126.
  • Changing your serial number or version will NOT void your warranty, as long as you change it back for any warranty repairs.
Method 1 - Android device - ScooterHacking Utility.

Step 1 - Download the ScooterHacking Utility from https://scooterhack.in/utility
Step 2 - Turn on your scooter and connect to it using the app.
Step 3 - Select "change region", then "US".
For G30LE and G30LD scooters select "custom", and type in your current serial number, but change the first 4 characters to N4GN
You can also select "Speedboost" to implement the "golden" or "magic" serial number
Image
Image
The scooter will reboot. By this point it'll go 30 km/h. Enjoy the speed :)

Method 2 - Windows 10 PC, Ninebot Flasher

Step 1 - Download Ninebot Flasher from the Windows Store - https://bit.ly/Ninebot-Flasher
Step 2 - Turn on your scooter and connect to it using the app.
Step 3 - Your current serial number will be displayed (ESC SN), type it into the box in the middle of the screen (ALL CAPS), but change the first 4 characters to N4GS.
For G30LE and G30LD scooters use the N4GN prefix.
You can also change your SN to begin with N4GSD1111C, that will enable the full available speed (over 30 kph on some scooters).
Step 4 - Click Ctrl-A and press Write ESC SN TWICE, or until the serial number (ESC SN) gets changed.
Image
Step 5 - Restart your scooter and enjoy the speed :)

Method 3 - Windows 10 PC, Ninebot IAP

Step 1 - Download Ninebot IAP from https://iap.scooterhacking.org/get
Step 2 - Turn on your scooter
Step 3 - Go to BLE and click "Start scan", select your scooter and click "Connect"
Step 4 - Go to the "Tools" tab, and click "Read".
Wait until Output gives you the serial number and click "Change SN"
Step 5 - Type your current serial number into the box, but change the first 4 characters to N4GS, and click OK.
For G30LE and G30LD scooters use the N4GN prefix.
You can also change your SN to begin with N4GSD1111C, that will enable the full available speed (over 30 kph on some scooters).
Image
Step 6 - Restart your scooter and enjoy the speed :)

Donation links:
Majsi (Ninebot Flasher dev) - https://www.paypal.me/majsinko
Lothean (IAP/ScooterHacking Utility dev) - https://scooterhack.in/donate
Fox Master (Me) - https://scooterhack.in/donatefox

Thanks for providing this wonderful information for Ninebot Max scooter.

Return to “Ninebot Max”

Who is online

Users browsing this forum: No registered users and 33 guests