The pictures are of the esc and the led and its driver board. There is a screen on this scooter, but I did not take it apart because everything is sealed in and it looks like there is only a display there and nothing else.
The led looks to be a 1 watt unit and it is pretty bright and very useable at night.
The battery has 5 pins at the top and 3 pins at the bottom, Pin #1 is ground, Pin#2 is Positive, the next 3 pins are connected with the pins at the bottom of the battery and they seem to be the 3 phase wires going to the BLDC motor.
This scooter does support regen braking and there is a microswitch in the brake lever. There is no app for this scooter, and unless there is a bluetooth module attached to the units screen I have not seen a bluetooth module on the unit. I am not yet sure how to remove the lcd screen, will take pictures once i figure it out.
![Image](https://live.staticflickr.com/65535/47052449234_6f8ca3ab46_z.jpg)
![Image](https://live.staticflickr.com/65535/46925736575_b36d444738_z.jpg)
![Image](https://live.staticflickr.com/65535/40875282863_41a5958627_z.jpg)
![Image](https://live.staticflickr.com/65535/46925736795_c5a2e19cd6_z.jpg)
![Image](https://live.staticflickr.com/65535/40875282603_9d72984a63_z.jpg)
![Image](https://live.staticflickr.com/65535/46925736445_e06ca3bc4e_z.jpg)
![Image](https://cdn.shopify.com/s/files/1/0071/0406/9747/products/electric_scooter_battery_2_425ce46d-c5f2-4a67-af2f-007a42443dca.jpg?v=1554922183)