Lime SJ2.5 hacking
Re: Lime SJ2.5 hacking
Does anyone know where to find a stock flash tutorial for this controller? I have a controller in good condition and the dash seems to work ok when plugged in on the charger. I'd like to power it on using a button or switch as the IoT was deleted by previous owner and doesn't appear to have ble module anywhere else. Any help with this controller would be much appreciated! Or directions on how to flash please 🙏
Re: Lime SJ2.5 hacking
Hi I playing with this, but I get a lot of hex E0 E0 E0 ... message from the scooter, but none of sent codes do anything. zs2.5 model. Anyone has a tip?
Re: Lime SJ2.5 hacking
Hello!
Did somebody find new working hex codes for LIS01_FW_1.8.5_201911162121000 ?
Did somebody find new working hex codes for LIS01_FW_1.8.5_201911162121000 ?
Re: Lime SJ2.5 hacking
I'm still working on finding a way to operate it with just hardware mods. I'm pretty sure there's a way to replace the IoT power on with a physical switch. looking to any electrical engineers for advice. I'm happy to donate hardware, schematics, battery or whatever would be required to anyone willing to help.Hello!
Did somebody find new working hex codes for LIS01_FW_1.8.5_201911162121000 ?
Re: Lime SJ2.5 hacking
Any updates on the LIS01_FW_1.8.5_201911162121000 start-up HEX commands? Just got my SPP hooked up and was hoping someone smarter than me on the subject would have made some progress. It was cool to actually see the few commands that people managed to cipher working but unfortunately the light blinking one has nothing to reverse it's effect. Hoping there is still someone making progress concerning this situation...
Re: Lime SJ2.5 hacking
Not sure if you'll find what you need, but I found a bunch of relevant info in the Wiki that I hadn't seen before. Link is at the top of the page.Any updates on the LIS01_FW_1.8.5_201911162121000 start-up HEX commands? Just got my SPP hooked up and was hoping someone smarter than me on the subject would have made some progress. It was cool to actually see the few commands that people managed to cipher working but unfortunately the light blinking one has nothing to reverse it's effect. Hoping there is still someone making progress concerning this situation...
Re: Lime SJ2.5 hacking
I just found out how the guy on reddit got the hex commands in the first place. He did not remove the SIM card or the bigger circuit board. He just attached the SPP bluetooth module and unlocked the scooter via the official lime application. He recorded the flood of HEX that the scooter submitted upon unlocking and found the command. I'm going to try this on my project.
Re: Lime SJ2.5 hacking
For quite a long time I've been trying to turn on the scooter via Serial. Finally (or yet), I didn't manage to do it.
I've send over 70000 various commands to the controller. The 'valid' commands get echoed, however nothing happens with the electronics.
Disassembling the firmware didn't help either (I'm kinda scared of Assembly)
(I'm on 1.8.5 FW)
Here's my bruteforce script written in Python, might help someone (or not)
https://gitlab.com/dani3l0/limesj2.5-stuff
I've send over 70000 various commands to the controller. The 'valid' commands get echoed, however nothing happens with the electronics.
Disassembling the firmware didn't help either (I'm kinda scared of Assembly)
(I'm on 1.8.5 FW)
Here's my bruteforce script written in Python, might help someone (or not)
https://gitlab.com/dani3l0/limesj2.5-stuff
- AlistairESP
- Posts: 2
- Joined: Thu Jun 01, 2023 8:17 am
Re: Lime SJ2.5 hacking
how i use the java i have to use bluetooth
- AlistairESP
- Posts: 2
- Joined: Thu Jun 01, 2023 8:17 am
Re: Lime SJ2.5 hacking
how i use the java i have to use bluetooth
Who is online
Users browsing this forum: Google Adsense [Bot] and 116 guests