Search found 79 matches

by CDogg
Sat Jan 13, 2024 9:57 pm
Forum: Ninebot ES and E-series
Topic: Recommended supplier for ESx control board and LED ground effect strip
Replies: 10
Views: 5369

Re: Recommended supplier for ESx control board and LED ground effect strip

So, it seems there's some confusion about the underglow LEDs on the ES1-4 and making them work either after the scooter has had some work done, or the settings have been modified via cfw. So, here's all you need to know about ensuring they are working properly on your scooter. If you have made some ...
by CDogg
Tue Jul 04, 2023 5:29 am
Forum: Ninebot Max
Topic: HELP, Max firmware 8.1.8 has an extra security measure built into the battery that affects the ESC and dash.........
Replies: 9
Views: 7646

Re: HELP, Max firmware 8.1.8 has an extra security measure built into the battery that affects the ESC and dash.........

The ground BMS bypass does technically work to operate the scooter, but I would only do this with extreme caution as now you've removed all the battery protection and cell balance charging as well. The best solution if you can't flash firmware 8.1.8, is to get a blank Ninebot G30 BMS from AliExpres...
by CDogg
Mon Jan 30, 2023 1:42 pm
Forum: Ninebot ES and E-series
Topic: External battery red side lights
Replies: 5
Views: 4142

Re: External battery red side lights

SHFW does disable the side lights, yes. Is there a fix or patch for this yet? I often make custom ES4s, E22s, E45s, etc for various customers involving custom paint, graphics, and even the external battery LEDs get changed to different colors upon request. It's unfortunate that I cannot apply SHFW ...
by CDogg
Mon Jan 30, 2023 1:32 pm
Forum: Ninebot ES and E-series
Topic: Did I destroy my controller?
Replies: 2
Views: 2987

Re: Did I destroy my controller?

not sure if you still need help with this or not, but replacing capacitors on your board is a fairly simple process. If it was one of the smaller ones near the large one, you can replace it with another, as long as the value of the new capacitor is the same or slightly larger (just don't replace it ...
by CDogg
Sun Jan 22, 2023 9:36 am
Forum: Other Ninebot Scooters
Topic: Ninebot-S (mini/pro) Speed Hack
Replies: 1
Views: 4608

Re: Ninebot-S (mini/pro) Speed Hack

Short answer: Yes. However, you should know the minipro has a higher speed when you attach it to the GoKart kit where I believe it can go almost a full 20mph. Which means that connecting it to the kit, allows it to go faster. I've been looking all around for the information on tricking the miniPro i...
by CDogg
Thu Jan 12, 2023 12:25 am
Forum: Ninebot ES and E-series
Topic: Recommended supplier for ESx control board and LED ground effect strip
Replies: 10
Views: 5369

Re: Recommended supplier for ESx control board and LED ground effect strip

I need 2 components: a controller that supports LED ground effects a LED ground effects strip I bought a controller on Amazon and it does not support LED lights. Any supplier recommendations? What controller was it that you purchased? After you installed it, did you flash new stock firmware to it? ...
by CDogg
Sun Dec 25, 2022 1:00 am
Forum: Ninebot Max
Topic: Need help diagnosing Ninebox G30P MAX
Replies: 5
Views: 3085

Re: Need help diagnosing Ninebox G30P MAX

The common issue with the Max G30 is the 3 phase wires getting too hot and melting together causing electrical issues at random. Usually the best fix for this is to either break away and clean the melted plastic to expose the metal bullet connectors (inside and out) and reinsulate with high quality ...
by CDogg
Sun Dec 25, 2022 12:43 am
Forum: Ninebot Max
Topic: Firmware issue with 48v battery
Replies: 5
Views: 3435

Re: Firmware issue with 48v battery

DRV184 can only be flashed via ST-Link.
Hey F0xMaster,
I really hate that I have to ask (the frustration from searching causes me intense rage), but can I trouble you for the pin out on flashing this newer ESC? The G30LD ?
by CDogg
Sun Dec 25, 2022 12:24 am
Forum: Ninebot ES and E-series
Topic: Hacking Ninebot ES1LD
Replies: 5
Views: 4529

Re: Hacking Ninebot ES1LD

With cheap cost, you should replace controller and display from ES1. But doing it yourself can be risky death run 3d You can't simply swap the dashboard and controller from an ES1 to this scooter due to the lack of hall sensor on the motor. This scooter runs a sensorless 3 phase motor with no ble. ...
by CDogg
Tue Dec 13, 2022 11:34 am
Forum: Ninebot Max
Topic: Tutorial!!! SNSC 2.3 Aka Ninebot Max Plus conversion
Replies: 49
Views: 108140

Re: Tutorial!!! SNSC 2.3 Aka Ninebot Max Plus conversion

Hey, unfortunately this isn’t possible, stock software on G30 doesn’t work via GPS cable, i think the Voi scooters have the only plug‘n play ones, there isn’t even a Pinout on these Dash‘s, just random solder pads all over the board, just rewire a G30 Max Cable, and it should work. I figured as muc...

Go to advanced search